Address
122 Spruce Ave, Richmond Hill, Ontario, L4C6W1, Canada

 

Email Address
[email protected]
[email protected]

 

Phone Numbers
905-707-0500
647-965-6946
1-800-488-2032

 

 

BF-19: Variable Frequency Generator

Features:0.3Hz ~ 3MHz Frequency RangeSine, Square, Triangle, Ramp, TTL and CMOS Output WaveformsExternal Voltage Controlled Frequency (VCF) FunctionDuty Cycle Control with Signal Inversion CapabilityVariable DC Offset ControlTwo Step (-20dB x 2) and Variable AttenuatorBuilt-in 6 Digit Counter with INT/EXT Function up to 150MHzINT/EXT AM/FM ModulationLIN/LOG Sweep ModeGate Controlled Voltage (GCV) Output for Synchronisation BF-19: Variable Frequency Generator
Main OutputFrequency Range:0.3Hz ~ 3MHz in 7 ranges
Amplitude:> 10Vpp (into 50W load)
Impedance:50W ±10%
Attenuator:-20dB ±1dB x 2
DC Offset:<-5V ~ >+5V (into 50W load)
Duty Control:80% : 20% : 80% to 1MHz continually variable
Display:6 digit LED display
 Sine WaveDistortion:£1%, 0.3Hz ~ 200kHz THD £ -35dB fundamental in all ranges (specification applied from MAX to 1/10 level)
Flatness:<0.3dB, 0.3Hz ~ 300kHz
<0.5dB, 300kHz ~ 3MHz
Triangle WaveLinearity:>98% 0.3Hz to 100kHz
³95% 100kHz to 3MHz
Square WaveSymmetry:±2% 0.3Hz ~ 100kHz
Rise/Fall Time:£100ns at maximum output (into 50W load)
CMOS OutputLevel:4Vpp ±1Vpp ~ 14.5Vpp ±0.5Vpp adjustable
Rise/Fall Time:£120ns
TTL OutputLevel:³3Vpp
Fan Out:20 TTL Loads
Rise/Fall Time:£25ns
VCFInput Voltage:0V ~ 10V ±1V (100:1)
Input Impedance:10kW ±10%
GCVOutput Voltage:To set the voltage between 0V ~ 2V as per different frequency
Sweep OperationSweep/Manual:Switch selectable
Sweep Rate:100:1 ratio maximum adjustable
Sweep Time:0.5s ~ 30s adjustable
Sweep Mode:Lin/Log switch selectable
Amplitude ModulationDepth:0 ~ 100%
MOD Frequency:400Hz (INT), DC ~ 1MHz (EXT)
Carrier Bandwidth:100Hz ~ 3MHz (-3dB)
EXT Sensitivity:£10Vpp for 100% modulation
Frequency ModulationDeviation:0 ~ ±5%
MOD Frequency:400Hz (INT), DC ~ 20kHz (EXT)
EXT Sensitivity:£10Vpp for 10% modulation
Frequency CounterINT/EXT:Switch selectable
Range:0.3Hz to 3MHz (EXT 5Hz ~ 150MHz)
Accuracy:Time base accuracy ±1 count
Time Base:±20ppm (23°C ±5°C) after 30 minutes warm up
Resolution:Maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
Input Impedance:1MW // 150pF
Sensitivity:£35mVrms (5Hz ~ 100MHz)
£45mVrms (100MHz ~ 150MHz)
Other DetailsPower Source:AC 115V/230V ±15%, 50/60Hz
Accessories:Power cord x 1, Instruction manual x 1, Test Lead (type GTL-101) x 2
Dimensions:251mm (w) x 91mm (h) x 291mm (d)
Weight:2.2kg approx

Product Profile

Product ID:BF-19
Description:BF-19: Variable Frequency Generator
Notes:This device has not been approved for use on humans in U.S.A or Canada and is therfore to be used only for experimental, hobby or sacramental purposes.

Leave a Reply

Your email address will not be published. Required fields are marked *